Roofing Contractor in Addison, IL
Durable, energy-efficient exterior upgrades trusted by Addison homeowners. Fully licensed, insured, and backed by 5-star Google reviews.
Royal Craft Home Remodelers provides roofing services in Addison, IL: inspections, repairs, full tear-off replacements and storm damage documentation. Roof replacement in Addison requires a Village permit, and Royal Craft files it under Illinois Roofing License #104.012213. The company has operated since 1973, owners Bill Cantalupo and Mauricio Moran supervise the work on site, and GAF lists Royal Craft as a Master Elite installer.
Complete Roofing & Siding Services for Every Home
What Roofing Services Does Royal Craft Offer in Addison?
Royal Craft starts each job by finding out what failed. Then it recommends a repair or a replacement based on what the roof shows.
Diagnostic Roof Inspections
A roof inspection should reach past what you can see from the driveway. Bill or Mauricio walks the roof surface, checks flashing and penetrations, and probes the attic cavity. They read moisture levels with a meter and photograph hard-to-reach slopes with a drone. You get a written recommendation before anyone quotes a scope.
Roof Repair in Addison, IL
- Wind-lifted or cracked shingles
- Flashing leaks around chimneys and skylights
- Cracked plumbing vent boots
- Storm damage limited to one slope
Roof Replacement in Addison, IL
A tear-off strips the roof to bare sheathing, so the crew can inspect every board instead of shingling over hidden rot. Royal Craft replaces damaged decking, then lays ice and water shield along the eaves and valleys. Synthetic underlayment and metal drip edge follow, and GAF Timberline HDZ architectural shingles finish the system.
Storm Damage Roof Repair and Insurance Documentation
Wind and hail damage can hit one elevation or all of them. Royal Craft photographs the damage and writes a line-item report of shingle, flashing and component conditions that you can hand to your carrier.
Siding Contractor in Addison, IL
Royal Craft installs James Hardie fiber-cement siding and insulated vinyl siding. Both hold up to Midwest freeze-thaw cycling when the installer flashes windows, corners and roof-to-wall joints correctly. Those joints leak far more often than the panels do.
Seamless Aluminum Gutters
Royal Craft roll-forms continuous aluminum gutters on site, so each run has no seams except at corners and downspouts. The crew sizes the gutters and downspouts to the roof area they drain. Overflow soaks the fascia and pushes water toward the foundation.
Attic Insulation and Ventilation
Soffit intake and ridge exhaust have to work as a pair. An exhaust vent with no intake pulls conditioned air out of the house instead of pulling outside air through the attic. Royal Craft checks insulation depth and airflow together before it adds either one.
How Do Addison Winters Affect Roof Installation?
The National Weather Service 1991–2020 normals for Chicago O’Hare record 38.4 inches of annual snowfall, with an annual normal high of 59.5°F and a low of 43.0°F. Addison shares that regional pattern: snow loads sit on the roof, then melt and refreeze at the eaves through every winter.
Ice Dam Defense
Heat escaping into the attic melts snow on the upper roof, and the meltwater refreezes at the cold eaves. The ice backs water up under the shingles. Royal Craft lays self-adhering ice and water shield along the eaves and valleys so that backed-up water meets a sealed membrane instead of bare deck.
Installation Adjustments by Home Type
| Home type | Condition to plan for | Royal Craft's approach |
| Heavily canopied lots, such as Wesglen Estates | Leaf load in gutters, branch abrasion, shaded roof slopes that stay damp | Impact-resistant shingles and gutter protection |
| Mid-pitch homes, such as Farmwood Estates | Aging shingles and deck wear near the end of service life | Full tear-off, deck repair and complete water barriers |
| Ranch-style homes, such as the Michael Lane area | Shallow attic volume with limited airflow | Low-profile baffles at the soffits and continuous ridge vent |
Ventilation sizing follows the manufacturer’s instructions and the code Addison enforces. As a baseline, the International Residential Code calls for 1 square foot of net free ventilating area (NFVA) per 150 square feet of attic floor, and allows 1 per 300 when specific conditions apply.
Roof Replacement in Addison Gallery
What Does a Royal Craft Roof Replacement Look Like Step by Step?
1. On-Site Physical and Attic Audit
Bill Cantalupo or Mauricio Moran walks the roof and checks the attic for moisture, insulation condition and airflow.
2. Site Protection and Tear-Off
The crew tarps landscaping, shields the property and strips the roof to structural sheathing.
3. Decking Repair and Water Barriers
Crews replace soft or rotted plywood. Then they apply ice and water shield and roll out synthetic underlayment.
4. Shingle Installation and Ventilation
Installers snap horizontal course lines for straight, even rows and fasten metal drip edge at the perimeter. They then install shingles to GAF’s fastening requirements and finish with ridge vent.
5. Magnet Sweep and Final Walkthrough
A magnetic sweep collects stray nails from the lawn and driveway. The owner then walks the finished roof and property with you.
Estimate Your Roofing & Siding Costs Instantly
Still deciding what’s right for your home? Use our free online tools to estimate your project budget, whether it’s asphalt shingles, luxury roofing tiles, or new siding installation for better curb appeal and energy efficiency.
Get a quick estimate based on your roof size, pitch, and material preferences.
Explore luxury roofing costs (synthetic slate, cedar shake, Spanish tile).
Estimate siding project costs based on wall area, material type, and trim details.
Try All Three & Compare the Options Side-by-Side
“Not just numbers, our estimators help translate those quotes into real product recommendations for your home, climate, and budget.”
What Warranties Come With a Royal Craft Roof?
A roof carries two separate warranties, and they cover different things.
| Royal Craft workmanship warranty | GAF factory warranty | |
| Issued by | Royal Craft | GAF |
| Term | 10 years | Set by the warranty issued |
| Covers | Labor, flashing integrity, ice and water shield installation | Manufacturer-backed coverage under GAF's stated terms |
| Example | Installation workmanship | System Plus Limited Warranty on eligible GAF systems installed by qualifying certified contractors |
Your GAF warranty document lists the exact terms for your roof.
Can I Finance a Roof Replacement in Addison?
Royal Craft offers GreenSky® financing for qualifying residential exterior projects. Prequalification uses a soft credit inquiry that doesn’t affect your score. A full application uses a hard inquiry, which can. On approved projects, funds release as milestones finish and you authorize each draw.
Roofing FAQ for Addison Homeowners
Do I need a building permit for roof replacement in Addison, IL?
Yes. The Village of Addison lists roof replacement among the improvements that require a building permit. Single-family residential roof permits are typically approved within 24 hours.
What documentation must a roofing contractor submit to the Village of Addison?
The application needs roofing license documentation, forms 055 and 058, and a Letter of Intent. The Village doesn’t require separate contractor registration. Royal Craft’s Illinois Roofing License is #104.012213.
How long does a typical residential roof replacement take?
Roof size, pitch, number of roof planes, deck repairs and weather set the schedule. Royal Craft gives you a project-specific timeline after the inspection defines the scope.
What is the difference between a roof overlay and a complete tear-off?
An overlay puts new shingles over the existing layer. A tear-off removes the old roofing down to the deck. The International Residential Code limits re-covering once a roof already has two layers, and a tear-off lets the crew inspect and replace damaged sheathing before the new system goes on.
How does proper attic ventilation prevent winter ice dams?
Soffit intake pulls cold outside air along the underside of the roof deck, and ridge exhaust pushes it out at the peak. That airflow keeps the deck close to outdoor temperature, so snow melts less and refreezes less at the eaves. Air sealing and insulation at the attic floor cut the heat that reaches the deck in the first place.
Are manufacturer roof warranties transferable if I sell my home?
Many GAF limited warranties allow transfer, but terms depend on the warranty issued. The System Plus Limited Warranty permits one transfer, and the new owner must notify GAF within the period the warranty states. Check your warranty document before you list the house.
Schedule a Roof Inspection in Addison, IL
Our Partners
