Roofing Contractor in Westmont, IL | Roof Repair & Replacement
Storm-ready roofing and siding services with hometown reliability in Westmont, IL.
- Illinois State Roofing Contractor License #104.012213 (IDFPR)
- GAF Certified™ Contractor
- BBB Accredited, A+ rating
- 1 to 2 day typical installation
Complete Roofing & Siding Services for Every Home
Roofing Services for Westmont Homeowners
A Westmont roof job starts with a physical inspection, not a satellite measurement. A leak can start at missing shingles, but it can also start at failed flashing, a roof-to-wall transition, a cracked pipe boot, a deteriorated valley, gutter backflow, attic moisture or soft decking. Royal Craft scopes the roof as one system: covering, deck, ventilation, flashing, drainage and the exterior components that tie into the roof edge.
Roof Inspections & Diagnostic Reports
Roof Repair & Storm Restoration
Complete Roof Replacement
- Tear-off down to the roof deck
- Decking audit, with replacement of plywood or OSB that has gone soft, delaminated or rotted
- High-tensile synthetic underlayment over clean decking
- Polymer-modified bitumen ice-and-water barrier at eaves, valleys, penetrations and code-required areas
- Drip edge, starter strips, GAF architectural shingles, hip caps and ridge caps
- Step flashing, apron flashing, counter-flashing, pipe boots and roof-to-wall transitions
- Soffit intake and ridge exhaust where the roof design supports passive airflow
- Debris removal, magnetic sweep cleanup, final review and warranty paperwork
Westmont Roofing Permits & Contractor Requirements
| Requirement | What it means for you |
| Express Permit category | Roof covering replacement, including tear-off or second-layer work, follows Westmont's Express Permit path |
| $100 minimum application fee | The Village collects the fee at submission, so your estimate should list it |
| 1 to 2 business day issuance | Express Permits typically clear in that window after a complete submission |
| Contractor registration | The roofer must hold current Westmont registration before applying |
| State license verification | Registration requires proof of an active Illinois roofing license |
This process protects you. It confirms that your roofer holds a state license, appears in the Village’s records and works under the correct permit path. Confirm the requirements for your exact scope with the Village before you sign, and ask any licensed roofer in Westmont for the license number and registration status in writing.
Should You Repair or Replace Your Westmont Roof?
The answer depends on the condition of your roof. A repair fits when the damage is isolated, traceable and surrounded by roofing that still performs. Replacement fits when age, repeated leaks, decking decay or spread-out storm damage affect the roof as a system.
| Condition | Repair may fit | Replacement may fit |
| Shingle age and wear | Shingles stay flexible and hold granules near the damage | Shingles turn brittle, curl, crack or lose granules across broad areas |
| Storm impact | Wind or hail damage stays on one slope or a few components | Damage shows up across multiple slopes, vents, gutters or exterior metals |
| Deck condition | Decking is firm and dry below the repair area | Decking is soft, deflected, stained, delaminated or rotted |
| Leak history | One leak traces to a pipe boot, flashing joint or small slope area | Leaks return after past repairs or appear in several rooms |
| Roof scope | A localized repair restores water shedding without disturbing large areas | The repair area grows large enough that replacement gives cleaner code and warranty alignment |
| Ventilation | A small intake or exhaust correction fits into the repair | Attic heat or moisture has aged the deck and shingles from below |
Royal Craft scopes cost from your roof, not from a city average. Square footage, pitch, walkability, tear-off layers, decking condition, shingle grade, underlayment system, flashing complexity, disposal, ventilation work and permit fees set the price.
Roof Replacement in Westmont Gallery
Siding & Exterior Remodeling Services
Royal Craft also works as a siding contractor in Westmont, IL when water, wind or age hits the wall system around the roof. Roof edges, gutters, soffits, siding, windows and doors all meet at water-management details, and each one needs correct flashing and drainage.
Fiber Cement & Composite Siding
Royal Craft installs James Hardie fiber cement siding and holds James Hardie Alliance Preferred Contractor status. It also installs LP SmartSide engineered siding and insulated vinyl such as CraneBoard®. A siding scope checks sheathing condition, weather-resistive barrier continuity, window and door flashing, roof-to-wall clearances, trim transitions and the drainage path behind the finished cladding.
Seamless Gutters & Attic Ventilation
Royal Craft roll-forms seamless aluminum gutters on site and installs downspouts, leaf protection, fascia, soffit and roof-edge drainage details. Poor drainage sends water behind fascia, into soffits and toward the foundation. Attic ventilation connects continuous soffit intake, open rafter paths and ridge exhaust where the roof design allows, which reduces the trapped heat and moisture behind winter ice dam conditions and deck staining.
Energy-Efficient Windows & Doors
Royal Craft installs Pella and ProVia replacement windows and doors. Each opening gets flashing tape, sill protection, air sealing, low-expansion insulating foam, trim integration and water control at the rough opening. Those details matter most when a roof or siding project exposes rotted trim, wet sheathing or failed flashing around an older opening.
Estimate Your Roofing & Siding Costs Instantly
Still deciding what’s right for your home? Use our free online tools to estimate your project budget, whether it’s asphalt shingles, luxury roofing tiles, or new siding installation for better curb appeal and energy efficiency.
Get a quick estimate based on your roof size, pitch, and material preferences.
Explore luxury roofing costs (synthetic slate, cedar shake, Spanish tile).
Estimate siding project costs based on wall area, material type, and trim details.
Try All Three & Compare the Options Side-by-Side
“Not just numbers, our estimators help translate those quotes into real product recommendations for your home, climate, and budget.”
Our 4-Step Installation & Quality Process
1. On-Site Physical Inspection
Bill Cantalupo or Mauricio Moran directs the on-site review. The inspection covers roof covering, flashing, valleys, gutters, deck condition, attic ventilation, insulation, visible storm damage and permit needs.
2. Itemized Proposal & Scope
You receive a written line-item proposal that separates materials, municipal permits, labor and waste disposal. Decking repairs, ventilation corrections, flashing details, warranty terms and financing options appear as their own lines, so you see the full scope of a repair, a replacement or an exterior add-on before work starts.
3. Execution & Site Protection
Crews protect your property, control debris, tear off existing material where required, inspect the deck, and install underlayment and ice-and-water barrier. They replace flashing, install shingles, sweep the grounds with a magnetic tool and finish with cleanup. A standard single-family roof replacement often finishes in 1 to 2 business days once the project is ready. EPA lead-safe containment applies when work disturbs regulated painted surfaces on qualifying older homes.
4. Municipal Sign-Off & Warranty Delivery
Closeout includes a final roof review, cleanup, Westmont permit inspection coordination when required, delivery of the 10-year workmanship guarantee, and manufacturer warranty registration for eligible systems.
Westmont Roofing & Permit FAQs
Is a permit required for roof replacement in Westmont, IL?
Yes. Westmont classifies roof covering replacement, including tear-off or second-layer work, under its Express Permit process. The application carries a $100 minimum fee, and the Village typically issues the permit within 1 to 2 business days after a complete submission.
Is Royal Craft registered and licensed to work in Westmont?
Royal Craft holds Illinois State Roofing Contractor License #104.012213. Westmont requires contractors to hold current Village registration before they submit a permit application, and registration requires verification of the state roofing license. Ask for proof of current registration with your estimate.
How long does a standard residential roof replacement take?
Most standard single-family roof replacements take 1 to 2 business days once the permit, materials, weather, access and final scope are ready. Complex roof geometry, soft decking, steep pitch, multiple layers and combined siding or gutter work can extend the schedule.
Do you assist with insurance claims for hail or wind damage?
Royal Craft provides objective roof inspections, high-resolution damage photography, line-item scope reports and technical support during adjuster walkthroughs. Your insurance carrier determines policy coverage.
How do I know if my Westmont roof needs repair or full replacement?
Repair fits when the failure is isolated and the surrounding roof still has service life. Replacement fits when shingle wear spreads widely, leaks repeat in different areas, decking is soft, storm damage covers multiple slopes or attic ventilation has damaged the roof from below.
What roofing materials does Royal Craft install?
Royal Craft installs GAF architectural shingle systems, along with the underlayment, ice-and-water barrier, flashing, ventilation components and decking repairs that go with them. Material choice follows roof pitch, deck condition, ventilation path and warranty goals.
What warranties protect a new roof?
Royal Craft backs its work with a 10-year workmanship guarantee. Manufacturer warranty coverage depends on the selected roofing system, eligible components, installation requirements and registration, so ask for both sets of paperwork at closeout.
Request a Free Roofing Estimate in Westmont
Our Partners
